What is the process of turning potato residue into feed for reuse? Potato residue can be made into feed by dehydration and drying.Today, I will share with you the main process of potato residue dehydration and drying.
Some potato dregs contain more than 80 percent water and need to be dehydrated before drying, Dingli company "mechanical dewatering + drum drying + pulsed air flow" technology, the high potato residue first passes through the special potato residue dehydrator, and the moisture is removed to a certain extent. It is sent to the stirring drum dryer to realize downstream drying, the material is constantly picked up under the copying board and scattered in a spiral way, built-in agitator blade device will fully agitator and shatter the materials,fully expand the material and heat heat exchange area, material and heat sufficient heat, moisture to evaporate rapidly vaporized, around 35%, complete drum drying process, It is discharged from the screw conveyor into the semi-wet material special pulverizer, crushing the particle size of the material to 1mm or less, and entering the pulsed air drying process. Within 3-10s, the material powder is rapidly removed to below 14%. The dry material powder is recovered by the cyclone discharging device and the pulse bag dust collector, and the exhaust gas is discharged to the standard, completing the whole drying process.
At present, the potato residue feed utilization is one of the main ways, Zhengzhou Dingli also provides many feed enterprises with the corresponding potato residue dehydration equipment, if you need,please contact us.
Large Drying Plant & Free Customization