How to correctly use the sawdust dryer
Author: Dingli Date: 2016-08-10
Before starting, check the power connection, rotating cylinder fixed position is correct. Open the cover, connecting the motor switch, let rotary drum idling operation, the direction of rotation according to the direction of the arrow, connect the electric heating wire, after 5 minutes of work, do not have the discharge of hot air, should be down to check electric heating wire outlet is blocked or not.
Dry work should lay down the lid, the work piece handling to stop, pay attention to the work piece to be evenly distributed in the rotary cylinder. Otherwise the centrifugal force is not parallel, dehydration machine shaking violently. The rotating cylinder work piece cannot overload, but also not too full. If dry work piece the fine, high density, or easy to store liquid, first centrifugal drying for 1-2 minutes, a work piece turning position, the heating centrifugal drying, in order to achieve satisfactory results.
To make the rotor stops rotating, the motor is shut down, and then the foot brake plate, but remember not brake if the motor not shut. Dewatering machine can be heated separately centrifugal drying, but not shutting down motor separate heating drying. Dewatering machine can’t heated centrifugal drying directly, but can’t centrifugal drying if the motor is not shutting down.
Before use the dewatering machine should read the instructions first, understand the operation principle. In order to ensure safety in production, we should always check and maintenance of dewatering machine, regularly to add high quality bearing lubricating grease, maintain dehydration machine working.
Zhengzhou Dingli company sawdust dryer is special drying sawdust. According to the material characteristics of sawdust make the drying effect optimal.