Maintenance guidelines for normal operation of corn dryers
Author: DingliDate: 2017-06-12
The dust concentration, air volume, temperature and composition of the tail gas of the corn dryer have little influence on the dust collection efficiency of the bag dust collector. The bag filter can be repaired in the compartment, and the ESP is easy to be affected. For areas requiring more stringent environmental protection and high operating efficiency, it is advisable to use a bag filter.
ESP exhaust resistance is small (general 200Pa) and stable. It has little effect on the work of the corn dryer, but the exhaust resistance of bag dust collector is large, and the resistance fluctuates greatly before and after ash cleaning , It has some influence on the operation of the corn dryer. The main machine can not run normally when the bag is dropped or the bag is dropped. When the stability of corn dryer is very high, esp should be used.
Grease in the bearing of corn dryer has been gradually contaminated by the products of wear, abrasives, products that penetrate through the sealing devices, and the products of their aging, if not replaced in time, it will cause accelerated wear of bearings, while lubricating oil can be filtered to ensure its normal operation. Accidental failures in the daily use of corn dryers are also caused by inadvertent or improper use and improper maintenance. Such failures are not predicted and can not be eliminated by extended running in period.
The corn dryer is one of the most commonly used drying equipment. In recent years, with the popularization of agricultural mechanization operation, the corn dryer has also entered the tens of thousands of households. For the lubrication of corn dryers: In the lubrication of bearings, we still need to operate under certain operating standards. The starting torque and friction loss of lubricating oil are less significant than that of grease lubrication. When the corn dryer changes lubricating oil, it is necessary to disassemble the connecting parts and do not have to disassemble it when using the lubricating oil. It is also very suitable to use lubricating oil in the bearings in the gear box, because of the way of splashing to achieve the purpose of lubricating gears and bearings at the same time